Wednesday, September 13, 2017

Snipes Bill Plane In Use

Here are two quick videos of me using a snipes bill plane to start a rabbet.



In this first video I use the snipes bill plane to define the line first established by my marking gauge. The snipes bill plane will set the gauge line deep into the wood while also widening it, giving me plenty of room for error once I move to the rabbet plane.


In this second video I am using the snipes bill plane on an angled surface. Believe it or not, it is much easier to make this second rabbet than the first (which is still easy.)


There is more information, along with images, here.

(one more pass and I'm complete)

I will be teaching this and much more on November 25-26 at the Connecticut Valley School of Woodworking.


Monday, September 11, 2017

Details with Hollows and Rounds

The degree of detail to which we woodworkers pay attention varies greatly from person to person and can change quite drastically over the course of a career, be it amateur or professional. At first you may not consider addressing some details, like proportion; at last you have likely stopped paying attention to others, like waxing the inside of bracket ogee feet. The pieces of our puzzle change.

The degree to which one copies period furniture also varies. Some simply use period design elements to make a piece that is new and fantastic. Others will copy the general piece while making it look brand new. Finally, there are those that copy everything, down to the acquired wear and patina from centuries of use and admiration.

In Fine Woodworking's issue #262, Mario Rodriguez wrote an intricate build article entitled "Hudson Valley Chest of Drawers." Being from Hyde Park, home to Val-Kill, which is home to that chest, my interest was piqued. Not only have I been there on several occasions, I wrote an uninspired senior thesis in college that addressed the work occurring at Val-Kill, among other happenings in the Roosevelts’ Hyde Park.

Mr. Rodriguez detailed and copied the chest of drawers to seemingly high perfection. He did, however, take liberties that we as woodworkers/puzzle-piece makers have afforded ourselves. The original piece was made with local pine and labeled “country”. Rodriguez chose to make his primarily out of a likely more appealing wood, walnut.

Rodriguez copied “everything” else about that piece. Except, he didn’t.

        (Illustrated quirked ogee with fillet that went along with the cut list.)


In this article and in regard to the base moulding Rodriguez wrote: “I was unable to match the profile of the chest’s base molding with anything in my collection of router bits, but it turned out I had a molding plane I’d made some years ago that enabled me to produce something very close.”
(Grecian that ultimately had a fillet added)


Rodriguez did not contradict himself with these two statements. His eye is such that he knows that the moulding he added around the base, the substituted decoration, was a copy. To him, it did not need to be exact. The proportions, casting of shadows and general adornment were wholly appropriate. The choice was unnoticeable to everyone except those to whom he chose to illustrate the original moulding instead of what he actually made.
  
There is a difference between the two profiles and I, with my blog, book and video, will continue to illustrate and demonstrate a series of tools that will allow you to make any moulding that happens along a straight length.

The profile discrepancies may not matter to you. However, maybe those small differences do affect you and preclude you from ever making pieces such as a tall case clock that has several short lengths of potentially highly complex and complementing moulding profiles, among others.

With the correct series of tools, hollows and rounds, coupled with an understanding of the process of how to steer them and create predictable, desirable results, you will have the ability to make the profile you want to make. You will not have to settle with one that is “very close” if that highly specific detail matters to you.

Let us continue to learn how steer a series of planes that have no fences and are seemingly difficult to steer. Let us learn how to gauge progress with tools with no depth stop. Let us learn to make the pieces of the puzzle we want instead of what we have.


Dimensions



Snipes Bill



 #8 Round




#6 Hollow



 (This is when my battery died)


Complete


Exactness means different things to different people. The irony of this article is that Rodriguez likely did the same thing those craftsmen at Val-Kill did 75+ years ago: he used a perfectly suitable profile that he had on hand and, as a result, was exact in nature. If, however, you are interested in another form of exactness, the literal, maybe hollows and rounds have a place in your shop.

(Note: and yes, my A/C was on while making this.)